When you build with ThermaSAVE Building Panels, THE BEST CHOICE, you have your INTERIOR, EXTERIOR, ALL CUTS, Plus Your Insulation in ONE STEP.
ThermaSAVE has endeavored to manufacture their building system to eliminate as many steps as possible for the customer, thus saving time and money. More steps by ThermaSAVE in the manufacturing process means less steps necessary at the job site.
The ThermaSAVE Building System is:
1. Structural and Pre-Engineered
2. Insulated – Exceeds energy codes, gives customer a choice
of R Factor
3. Exterior Finish in Place – Customer choice of any sheet
material i.e.: Siding of LP-11, T1-11, Oriented Strand Board to which Metal,
Aggregate, Acrylic Stucco or Fiber Cement Masonry Sheet Exteriors, i.e.:
Brick, Block, Marble and Stone can be applied.
4. Interior Finish: Ready for Paneling, Sheet Rock and
Texture or Acrylic Stucco.
5. Pre-Cuts: All Corner, Doors, Windows, Roof and Gable
Cuts.
6. Coatings in place: Coatings on Roofs, Freezers
requiring USDA, Floating Docks, Decks and Commercial Floors.
WHAT STEPS HAS THERMASAVE ELIMINATED BY THE ABOVE?
1. Customer can be assured that the ThermaSAVE Building System is STRUCTURAL
and has been PRE-ENGINEERED by the fact that the system
has passed extensive testing and has been approved by the International
Code Council (I.C.C.) The ICC report supplies all approved information
for design.
2. ThermaSAVE INSTALLS THE INSULATION in manufacturing,
thus eliminating the need for on-site installation.
3. ThermaSAVE INSTALLS THE EXTERIOR FINISH, thus eliminating
on-site installation. Since the exterior sheet material is applied
to the expanded polystyrene core, this eliminates one sheet of OSB or plywood
and eliminates the need to attach the exterior finish on-site, again saving
time and money.
4. INTERIOR FINISH of solid wood is ready for customers’ desired application.
5. COATINGS APPLIED in manufacture eliminate the need for on-site installation
with the exception of sealing seams.
6. PRE-CUTS can be made in manufacturing process eliminating the need for
cuts on site, saving time in construction.
ThermaSAVE continues research in order to offer more interior and exterior finishes, to eliminate even more steps for the customer. ThermaSAVE is in the process of testing a fire protection product that will eliminate the need for sheetrock as a fire barrier.